I have one question, I modelled 2D RC column with Concrete Damaged Plasticity
(CDP) model. I applied lateral displacement say d=100mm at the top of the column. And I want the column go naturally after applied the d=100mm. How I can do that? Thank you for the help. Wait to hear the answer. Regards, Ayda [Non-text portions of this message have been removed] |
If you mean you want to delete the applied displacement, then use
*BOUNDARY,OP=NEW, then redefine your boundary conditions, leaving out the one you want to eliminate (in CAE you can use the boundary condition manager to deactivate boundary conditions). Regards, Dave ------------------------- Dave Lindeman Lead Research Specialist 3M Company 3M Center 235-3F-08 St. Paul, MN 55144 651-733-6383 On 8/11/2010 7:24 AM, M Aida AbKadir wrote: > > > I have one question, I modelled 2D RC column with Concrete Damaged > Plasticity > (CDP) model. I applied lateral displacement say d=100mm at the top of the > column. And I want the column go naturally after applied the d=100mm. > How I can > do that? > > Thank you for the help. Wait to hear the answer. > > Regards, > Ayda > > [Non-text portions of this message have been removed] > > ------------------------------------ Community email addresses: Post message: [hidden email] Subscribe: [hidden email] Unsubscribe: [hidden email] List owner: [hidden email] Shortcut URL to this page: http://groups.yahoo.com/group/AbaqusYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Abaqus/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Abaqus/join (Yahoo! ID required) <*> To change settings via email: [hidden email] [hidden email] <*> To unsubscribe from this group, send an email to: [hidden email] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
hello
i think you must define an amplitude for continuing deformation after 100mm. to do that you must define for example like this: time amp 0 0 5 100 10 0 this say that 100mm displacement occur at 5 second and after that for 5 sec analysis will continue. mohamad On 8/11/10, Dave Lindeman <[hidden email]> wrote: > If you mean you want to delete the applied displacement, then use > *BOUNDARY,OP=NEW, then redefine your boundary conditions, leaving out > the one you want to eliminate (in CAE you can use the boundary condition > manager to deactivate boundary conditions). > > Regards, > > Dave > > > ------------------------- > Dave Lindeman > Lead Research Specialist > 3M Company > 3M Center 235-3F-08 > St. Paul, MN 55144 > 651-733-6383 > > On 8/11/2010 7:24 AM, M Aida AbKadir wrote: >> >> >> I have one question, I modelled 2D RC column with Concrete Damaged >> Plasticity >> (CDP) model. I applied lateral displacement say d=100mm at the top of the >> column. And I want the column go naturally after applied the d=100mm. >> How I can >> do that? >> >> Thank you for the help. Wait to hear the answer. >> >> Regards, >> Ayda >> >> [Non-text portions of this message have been removed] >> >> > > > ------------------------------------ > > Community email addresses: > Post message: [hidden email] > Subscribe: [hidden email] > Unsubscribe: [hidden email] > List owner: [hidden email] > > Shortcut URL to this page: > http://groups.yahoo.com/group/AbaqusYahoo! Groups Links > > > > |
Free forum by Nabble | Edit this page |